Я пытаюсь скомпилировать caffe на Ubuntu 14.04 LTS с Anaconda, в режиме только для процессора и с OpenBLAS. К сожалению, я получаю ошибку ld.
Я следовал инструкциям, добавлял зависимости, которых не было в Anaconda, и соответствующим образом корректировал Makefile.config, особенно включая путь к Anaconda. Когда я делаю make all, я получаю сообщение об ошибке, которое вы видите ниже (я также включил Makefile.config), хотя два файла, которые не были найдены, находятся в папке anaconda/lib и в соответствующих папках pkgs как общие библиотеки.
Большое спасибо за Вашу помощь!
Терминал:
CXX/LD -o .build_release/tools/extract_features.bin
/usr/bin/ld: warning: libpng15.so.15, needed by /home/mclab/anaconda/lib/libopencv_highgui.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: libgfortran.so.1, needed by /home/mclab/anaconda/lib/libopenblas.so, not found (try using -rpath or -rpath-link)
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_strip_alpha@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_get_io_ptr@PNG15_0'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_pow_i4_i4'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_palette_to_rgb@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_swap@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_write_end@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_compression_level@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_write_image@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_destroy_read_struct@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_write_info@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_gray_to_rgb@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_destroy_write_struct@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_get_IHDR@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_read_update_info@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_compression_strategy@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_create_read_struct@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_read_info@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_longjmp_fn@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_read_image@PNG15_0'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_compare_string'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_create_write_struct@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_bgr@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_create_info_struct@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_write_fn@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_init_io@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_packing@PNG15_0'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_pow_r8_i4'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_concat_string'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_pow_r4_i4'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_etime'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_error@PNG15_0'
/home/mclab/anaconda/lib/libopenblas.so: undefined reference to `_gfortran_copy_string'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_strip_16@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_read_end@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_IHDR@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_read_fn@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_expand_gray_1_2_4_to_8@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_rgb_to_gray@PNG15_0'
/home/mclab/anaconda/lib/libopencv_highgui.so: undefined reference to `png_set_filter@PNG15_0'
collect2: error: ld returned 1 exit status
make: *** [.build_release/tools/extract_features.bin] Error 1
Makefile.config:
## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!
# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1
# CPU-only switch (uncomment to build without GPU support).
CPU_ONLY := 1
# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
CUSTOM_CXX := g++
# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr
# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the *_50 lines for compatibility.
CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
-gencode arch=compute_20,code=sm_21 \
-gencode arch=compute_30,code=sm_30 \
-gencode arch=compute_35,code=sm_35 \
-gencode arch=compute_50,code=sm_50 \
-gencode arch=compute_50,code=compute_50
# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
BLAS := open
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
BLAS_INCLUDE := /home/mclab/anaconda/pkgs/openblas-0.2.14-1/include
BLAS_LIB := /home/mclab/anaconda/pkgs/openblas-0.2.14-1/lib
# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib
# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local
# MATLAB_DIR := /Applications/MATLAB_R2012b.app
# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /home/mclab/anaconda/include/python2.7 \
/home/mclab/anaconda/lib/python2.7/site-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
# ORIGINAL:
ANACONDA_HOME := $(HOME)/anaconda
PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
$(ANACONDA_HOME)/include/python2.7 \
$(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include \
# MODIFIED
# ANACONDA_HOME := /home/mclab/anaconda
# PYTHON_INCLUDE := /home/mclab/anaconda/include \
# /home/mclab/anaconda/include/python2.7 \
# /home/mclab/anaconda/lib/python2.7/site-packages/numpy/core/include \
# We need to be able to find libpythonX.X.so or .dylib.
# PYTHON_LIB := /usr/lib
PYTHON_LIB := $(ANACONDA_HOME)/lib
# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib
# Uncomment to support layers written in Python (will link against Python libs)
WITH_PYTHON_LAYER := 1
# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib
# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib
# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1
BUILD_DIR := build
DISTRIBUTE_DIR := distribute
# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1
# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0
# enable pretty build (comment to see full commands)
Q ?= @
